RevPi Connect S/SE is an I/O expansion model for industrial Raspberry Pi RevPi base module. Equipped with embedded Raspberry Pi Compute module 4S and equipped with 2xLAN, 2xUSB2.0 and RS485 interfaces.
Pre-installation of the software PLC CODESYS® is also possible.
RevPi Connect S/SE is ideal for developing gateways that require LAN interface division.
RevPi Connect S / RevPi ConnectS Product specification
| Raspberry Pi | Compute Module 4S (CM4S)* |
|---|---|
| Processor | Broadcom BCM2711, Quad core Arm Cortex-A72 1.5GHz |
| RAM | 1GB LPDDR4 |
| Flash memory | On-board eMMC 8/16/32GB |
| OS | Raspberry Pi OS |
| Interface | 1 x Power input connector 1 x Digital input/output connector – Input：24VDC 3.0V(0->1)/2.3V(1->0) – Ralay output：2A@30VDC(Resistive load) 2 x USB Type-A(Maximum current up to 1A) 2 x RJ45 10/100Mbps Ethernet 1 x RS-485コネクタ(no electrical isolation) 1 x Micro-USB (only for eMMC writing) 1 x Micro HDMI |
| Etx. Interface* | 1 x PiBridge system bus(Black) 1 x ConBridge system bus(Glay) |
| LED | Power：Normal(Green), Error(Red) A1, A2,A3：Customized LED(Green/Red) WD(Watchdog)：Normal(Green)、Error(Red) REL(Relay)：open(off), close(Green) |
| Power input range | DC12～24V －15%/+20% |
| Power consumption | about 20W |
| Operating Temp. range | -25～55℃ |
| Storage Temp. range | -40～85℃ |
| Operarting humidity range | 93%(No condensation) |
| IP rate | IP20 |
| Housing material | Polycarbonate |
| Dimensions（HxDxW) | 96 x 45 x 110.5 mm(not include protrusions) |
| Weight | approx.220g |
| ESD protection | 4kV/8kV (EN61131-2, IEC 61000-6-2) |
| EMI | EN61131-2, IEC 61000-6-2 |
| EMS | EN61131-2, IEC 61000-6-2 |
| Certification | CE、RoHS、UL |
| Instalation method | DIN-rail mount |
*Please note that CM4S new CPUs are only supported with kernel 5.10.
**RevPi Connect S series and SE series have different expansion modules that can be used.
• S series:
Compatible with Expansion I/O modules, Con modules for M-bus/CAN-bus, and Fieldbus Gate modules.
• SE series:
Expansion I/O modules and Con modules for M-bus/CAN-bus can be used. Not compatible with fieldbus Gate modules.
(Please inquire about Con module and Gate module separately)
Ordering infromation
| S series | Parts No. |
|---|---|
| RevPi Connect S eMMC 8GB model | 72PR100362 (wirh CODESYS® 72PR100362C01) |
| RevPi Connect S eMMC 16GB model | 72PR100363 (wirh CODESYS® 72PR100363C01) |
| RevPi Connect S eMMC 32GB model | 72PR100364 (wirh CODESYS® 72PR100364C01) |
| SE series | Parts No. |
|---|---|
| RevPi Connect S eMMC 8GB model | 72PR100368 (wirh CODESYS® 72PR100368C01) |
| RevPi Connect S eMMC 16GB model | 72PR100369 (wirh CODESYS® 72PR100369C01) |
| RevPi Connect S eMMC 32GB model | 72PR100370 (wirh CODESYS® 72PR100370C01) |
| Option | Parts No. |
|---|---|
| RevPi start up Power kit (AC adopter＋connector) | 72PRPOWK01 |
Start up power kit is for setting up. Please consider to use
the regulated power supply when the product is implemented.
Product data sheet/drawing data
| Model | Datasheet | 3D (.step) | Circuit diagrams | Digital I/O pin asign | Declaration | Cirtificates | Test report |
|---|---|---|---|---|---|---|---|
| RevPi Core S |  |
coming soon | coming soon | – | |
 |
|
| RevPi Core SE | coming soon | coming soon | – | ||||
| RevPi Connect S | coming soon | coming soon | – | ||||
| RevPi Connect SE | coming soon | coming soon | – | ||||
| RevPi DIO |  |
|
|
||||
| RevPi AIO | – |
Various materials for registered users
Manuals, softwares, drivers are available on user download page.
The member registration is free. Please fill out the form here.